@▷ 200mA/Hour & 12V NiCAD Battery Charger | Diagram for Schematic

200mA/Hour & 12V NiCAD Battery Charger

The following diagram is the schematic diagram of 12V NiCAD battery charger with charging rate of 200mA/Hour.

200mA/Hour   12V NiCAD Battery Charger circuit

This NiCAD battery charger circuit charges the battery at 75 mA until the battery is charged, then it reduces the current to a trickle rate. It will fully recharge a dead/unpowered battery in 4 hours and the battery can be left in the charger indefinitely. To set the shut off point, connect a 270 ohm / 2 Watt resistor across the charge terminals and adjust the pot for 15.5V across the resistor.


"200mA/Hour & 12V NiCAD Battery Charger Search Tags"
Battery Charger
Advertiser