@▷ Fire alarm circuit using UM66T TDA2002 | Diagram for Schematic

Fire alarm circuit using UM66T TDA2002

Here is a simple fire alarm circuit based on a LDR and lamp pair for sensing the fire.The alarm works by sensing the smoke produced during fire.The circuit produces an audible alarm when the fire breaks out with smoke.

When there is no smoke the light from the bulb will be directly falling on the LDR.The LDR resistance will be low and so the voltage across it (below .6V).The transistor will be OFF and nothing happens.When there is sufficient smoke to mask the light from falling on LDR, the LDR resistance increases and so do the voltage across it.Now the transistor will switch to ON.This gives power to the IC1 and it outputs 5V.This powers the tone generator IC UM66 (IC2) to play a music.This music will be amplified by IC3 (TDA 2002) to drive the speaker.

Source: http://www.circuitstoday.com/category/fire-alarm
Thank you.

"Fire alarm circuit using UM66T TDA2002 Search Tags"
Audio - Alar, alarm system
Advertiser