@▷ L200 Power Supply Regulator With sense Lines | Diagram for Schematic

L200 Power Supply Regulator With sense Lines

L200 Power supply regulator with sense lines


L200 Power Supply Regulator

There are applications in which it is important for the supply voltage to be largely independent of the level of the output current, which is, of course, particularly so in the case of variable loads.

When the load is linked to the power supply by relatively short wires, a good variable power supply maintains the output voltage at a virtually constant level. Unfortunately, in practice, these wires can be fairly long, and since they have resistance, there is a voltage drop across them. This interferes with good regulation; the only way of avoiding this problem is to link the control part of the power supply to the load via separate sense lines.

Unfortunately, this cannot be done readily in every power supply without some tedious work, but as the diagram shows, in the case of the L200 it presents no problems.

L200 Power Supply Regulator With sense Lines circuit diagram

PARTS LIST R1 820Ω R2 0.47Ω 5W P1 10kΩ preset C1 0.1µF C2 0.22µF C3 2200µF 50V IC1 L200c Good heat sink for L200

In the diagram, A and D are the usual output terminals, while B and C are the sense input terminals. The output voltage,  U0, is

U0=2.77(1+Rp/R1),

where U0 is in volts and Rp is the effective resistance of P1. Resistor R2 in series with terminals A enables current limiting. The peak level of the output current, I0, in amperes is

I0=0.45/R2

The maximum input voltage to the regulator is 40V, and the peak output current is 2A.

L200 ADJUSTABLE VOLTAGE AND CURRENT REGULATOR PIN Configuration

L200 ADJUSTABLE VOLTAGE AND CURRENT REGULATOR PIN Configuration

The regulator has on-board thermal protection, but this does not mean, of course, that is should not be mounted on suitable heat sink when the dissipation is high.

"L200 Power Supply Regulator With sense Lines Search Tags"
power supply, Regulator Diagrams
Advertiser