@▷ Simple electronics projects and circuits | Diagram for Schematic

Simple electronics projects and circuits

Simple Electronics Projects for Beginners

This article is a collection of simple electronics circuits we have published over a span of 3 years, which can be used as simple electronics projects for students, beginners, engineering students and other hobbyists. The following circuits listed below can also be used for your mini project needs. But we wont recommend any of these circuits for your final year or main project requirements. While selecting the circuits for this article, we have taken care to serve you with popular circuits in our website which are easy to implement. The logic behind selecting popular circuits as projects is simple; just because of “comments by users”.  Comments refine a circuit by correcting many flaws and errors in the original design. We suggest you go through all the comments before practically testing any of these circuits which will save you a lot of troubleshooting time.  All of these circuits fall into the basic or small or hobby category and that’s why we used simple electronics projects as title. And all these circuits are free of any patents and any other legal stuffs; you can experiment them at your own free will and creativity.

basic electronics projects

So here begins the list:-

1. Simple Water Level Indicator

Objective:- To measure level of any conductive non corrosive liquid.

We selected this circuit first because of it’s simple nature. This water level indicator circuit is easy to implement and is composed of least components.You only need 5 transistors, 5 resistors and 5 LED’s to implement this circuit; which makes it an ideal simple electronics project for beginners and students.

2. Automatic LED Emergency Light

Objective:- Implement a Lighting system/device using LED’s

This is another popular circuit which can be used for a simple project development. There are 3 versions available. One is developed by CircuitsToday team and other by Seetharaman Subrahmanian (a great contributor of CircuitsToday). Links are given to other similar circuit applications like LED ramp circuit, street light circuit, flashing led circuit etc.

3. Infrared Motion detector

Objective:- Detect Infrared rays. This circuit idea can be modified to design simple projects like Intruder alarm, Anti theft systems etc.

A circuit application that every one must try out. This circuit will teach you how to deal with infrared detection (transmitting and receiving), usage of 555 IC as a monostable multivibrator inside an application, usage of  IC’s like LM 1458 etc.

4. 7 segment counter project

Objective:- Learn application of 7 segment display. (This circuit will teach you how to use 7 segment display for your future applications)

A simple electronic circuit that uses two IC’s – NE 555 (as an astable multivibrator to trigger CD 4033 IC) and CD 4033 for counting purpose. Apart from two IC’s and a 7 segment display (LT 543), the circuit uses a minimal set of components, 4 resistors, 1 capacitor and a diode.

5. Fire Alarm Project

Objective:- Detect fire in a given area and warn using an alarm system.

Though simple in nature this circuit will help you to understand how real world electronics systems are built. This circuit is a basic one which senses smoke to detect fire and hence produce an alarm to warn people around. It uses an LDR to detect smoke (By default LDR is kept active by a light fall; smoke will mask the light and hence LDR resistance will increase), IC UM 66 as a tone generator, IC 7805 to drive tone generator IC and TDA 2003 IC as an amplifier to drive the speakers (alarm system).

6. Lead acid battery charger

Objective:- To charge a battery.

So why not try your hands at charging a lead acid battery? Here is a simple electronics project  that will let you charge your battery. This circuit is very simple in nature which consists of an LM317 IC (which provides correct charging voltage), a couple of resistors, capacitors and a potentiometer.

7.  Simple 10 Watt Audio Amplifier

Objective:- To design a 10 watt audio amplifier.

How can we avoid audio electronics projects? So let’s start our audio electronics journey with a simple audio amplifier project. As written in the objective, our aim is to design and implement a simple audio amplifier using IC TL081 (as a preamplifier). A much advanced audio amplifier project is given below.

8.  150 Watt Amplifier circuit

Objective:- To design an amplifier circuit and deliver 150 watt RMS to a 4 ohm speaker.

The first thing to mention is; above given project is the most popular circuit on CircuitsToday with live discussions going on (so far 563+ comments). We recommend you to g through all comments section to understand various problems faced by our readers while implementing this circuit. This will help you on your troubleshooting phase. So lets talk a little about this circuit. This is the cheapest 150 watt amplifier you can make using a pair of Darlington transistors TIP 142 and 147.  You have to go through the circuit design and description carefully as it will take a little bit of effort to get the desired output.

9. Simple Inverter Project

Objective:- To design a  simple 100 watt Inverter.

This is a simple low cost inverter circuit which comprises of IC CD 4047 and two MOSFET’s IR540 as it’s main components. This circuit will teach you basics of the common application we always use in building electronics devices.

10. FM Transmitter project

Objective:- To design a FM transmitter circuit which can transmit signals upto 2 kilometers.

How about designing a local FM station for your college? A station where students can air their programs (songs,speeches,solos) and all your college mates can receive them? Here is such an interesting project.  This is low cost project which can be assembled using basic components.

So far we have covered 10 simple electronics projects for beginners, students and hobbyists. We will keep on expanding this article in future with other interesting small and basic projects.

Latest Projects

1. Water Level Controller using 8051 Microcontroller 

Well, this is a fully functional water level controller made using AT89S51 (8051 compliant IC from Atmel) micro controller from Atmel.This water level controller monitors the level of the over head tank  and automatically switches on the water pump when ever the level goes below a preset limit.

2. Voltmeter using 8051 Microcontroller 

This is another simple project using 8051 micro controller, made using the same AT89S51 IC from Atmel. With this circuit you can measure voltages in the range of 0 to 5 volts.

Some external resources are given below:-

1. A collection of Electronics Mini Projects

2. Amplifier circuits and projects

You can discuss your project ideas in our - Electronics projects community

Advertiser